Barriers for Hire 0508 I-BARRIER
  I-Barrier.co.nz
Home Specifications Contact & Gallery
TL-2 MASH 1 water filled barriers
Ricochet™ TL-2 Water Filled Barriers
 4-22774
SPECIFICATIONS
Longitudinal Barrier
Terminal End
Terminal End Cap Male
Terminal End Cap Female
Barrier Pin
In respect of this barrier MASH-1 standard at TL2 is:  Ability to withstand four (4) physical impact tests  Vehicle masses of 1100 kg and 2270 kg  Impact angle is 25° and direct end on  At a speed of 70 km/hr The above determines the performance envelope for the barrier system. Impacts outside the above parameters may result in unpredictable results and subsequent adverse outcomes. In addition to the above, the minimum installed barrier units is thirty two orange (32) which ends with two yellow (2) terminal end units with one yellow (1) terminal end cap at each end.
Longitudinal Barrier
Terminal End
Terminal End Cap Male
Terminal End Cap Female
The Ricochet Barrier system is easy and simple to assemble.
Longitudinal Barriers
Terminal Ends units
Total Length    1.7mtrs
x4 (2 units per end)
End Cap Male
End Cap Female
x1
x1
Barrier Pin
Total Units -1
All Ricochet Safety Barriers (Orange) need to be filled with 600 litres of water after assembly. Terminal End units and Terminal End Barrier Caps (Yellow) MUST NOT contain water as they are certified not to.
Refer to NZTA link:
PRODUCT & INSTALLATION MANUAL
Email: info@ibarrier.co.nz
Specifications